I again used Chocolate Chip Craft Ink and Clear Embossing Powder with the stamped image for the background of the card (another floral stamp from the Thoughts & Prayers stamp set). 

Then I adhered the focal point to the card front using Stampin’ Dimensionals.

Other Ideas:

• Instead of using embossing on the card front, use another darker piece of patterned paper from Bella Bleu or other designer series paper of your choice.
• Add Vintage Brads to each of the corners on the card’s focal panel.
• Use Vintage Brads or Build-a-Brads in the bottom, right corner area (like 3 in a row).
• Add an entire row of brads along the bottom focal panel (under greeting) and use the mat pack to help align all the brads.
• Add ribbon.

This project includes the following Stampin’ Up! merchandise:

• Magnetic box
• Thoughs & Prayers stamp set
• Chocolate Chip Craft Ink
• Clear Embossing Powder
• Heat Gun
• Bella Bleu designer series paper
• Autumn Meadows designer series paper
• Very Vanilla paper
• 1-1/4" Striped Grosgrain Ribbon (Chocolate Chip)
• SNAIL Adhesive

Here is a picture of the magnetic box when first opened:

Here is a picture of the box beginning to fold and take form:

Completed box picture:

Instructions:

• Cut a piece of 3-1/4 x 3-1/4 square of Bella Bleu designer series paper.
• Stamp the tree from Thoughts & Prayers in Chocolate Chip Craft ink, as well as desired greeting, sprinkle with Clear Embossing Powder and then heat.
• Adhere to a piece of 3-10/16 x 3-10/16 square of dark brown paper from the Autumn Meadows designer series paper pack.
• Then adhere that to a piece of 3-3/4 x 3-3/4 square of Very Vanilla.
• Tie and know ribbon around the box and card.
• You’re done! It’s that easy!

Then, the only other Stampin’ Up! products used were:

• Vintage Brads
• 1/16" Circle Handheld Punch
• Vellum Paper
• Chocolate Chip Taffeta Ribbon
• Tearing Tool
• Close to Cocoa Cardstock
• SNAIL Adhesive
• Stampin’ Dimensionals

Other Thoughts:

• Crystal Effects again would have added a nice touch.
• Chocolate Chip Craft Ink and Clear Embossing Powder would have been nice to use with the greeting as well.

Fall is here and brings with it beautiful colors.  This card featuring the new Autumn Meadows designer series paper from the Holiday Mini catalog.  Although it uses Really Rust, More Mustard and Taken with Teal, I used the In Colors Dusty Durange. Crushed Curry and Bermuda Bay – mix and match the colors that you have!  In addition, the following Stampin’ Up! products were used:

• Bermuda Bay, Dusty Durango and Whisper White Cardstock
• Bermuda Bay, Dusty Durango and Crushed Curry Stampin’ Write Markers
• Chocolate Chip Classic Ink
• Blender Pen
• Dusty Durange Polka Dotted Grosgrain Ribbon
• Lovely as a Tree Stamp Set
• Chit Chat Rub-ons
• Stampin’ Dimensionals
• SNAIL Adhesive
• Crystal Effects

To make this card, first start with the standard landscape card in Dusty Durango, then cut a 4 x 5-1/4 piece of the bark-like patterned paper from Autumn Meadows (or other desired pattern). Adhere to the card front.

Cut a piece of 3×3 Whisper White, 3-1/8 x 3-1/8 of Dusty Durango, and 3-1/4 x 3-1/4 of Bermuda Bay.

Place the Whisper White piece of paper on the patterned designer series paper you selected and then stamp the large tree from Lovely as a Tree on the left and it also goes onto the designer series paper (using Chocolate Chip ink).  Then ink and stamp the horizontal tree stamp from Lovely as a Tree – some of the image on the white paper and some on the designer series paper.

Then adhere the Whisper White to Dusty Durango and then that to the Bermuda Bay.  Cut a small piece of Dusty Durango polka dotted ribbon, fold, and adhere to the back of this panel. Adhere this panel to the card front.

Next cut a small strip of the brown leafy patterned paper under the greeting you select (I used Peaceful Wishes from Chit Chat rub-ons collection).

Then  ink the leaves from Lovely as a Tree in Chocolate Chip, then use the Stampin’ Write markers and color different areas of the stamp in the different colors (Bermuda Bay, Crushed Curry, Dusty Durange), and then stamp on scrap.  I then used the Chocolate Chip ink and Blender pen to fill in the leaf. 

Lastly, finish the card by adding Crystal Effects to the leaf and set aside for a while to let it dry completely. Then adhered to the card front using Stampin’ Dimensionals.

Other Thoughts:

• Use Really Rust, More Mustard or Taken with Teal.
• Add sponging with Chocolate Chip Ink.
• Add more "trees" in Really Rust or Dusty Durango.
• Stamp a larger greeting.
• Cut, color and add more leaves (and using Crystal Effects).
• Staple the piece of ribbon to the top/front instead of tucking behind the focal point panel.

The Stampin’ Up! products used in this project:

• Crushed Curry and Soft Suede cardstock
• Watercolor paper
• Blender Pen
• Crushed Curry, Dusty Durango, and Soft Suede Classic Ink pads
• Soft Suede Polka Dot Grosgain ribbon
• Tearing Tool
• SNAIL Adhesive
• Paper Snips

Instructions

1. Cut standard card from Crushed Curry. Horizontal layout.
2. Stamp leaves along the bottom of the page and then color them using a blender pen and the Crushed Curry, Dusty Durango and Soft Suede inks.  With the stamp pad closed, squeeze the lid and bottom (this put ink on the top of the ink pad – shown below). Then dip the blender pen into the small pool of ink to then color the images. Aqua Pens are also another great tool for watercoloring.

   
    

3. Cut a piece of 5-1/4 x 3 Soft Suede and use the Tearing tool to create the ripped edge.
4. Cut the Watercolor paper slightly to 5 x 3 and also tear (as shown below in step 7).
5. To create the watercolored pumpkins, we will use masking. First stamp a large and small pumpkin on scrap paper. Then cut them out.

   
    

6. On the Watercolor paper, stamp 2 smaller pumpkins in desired locations.  Then place the small cut-out over the previously stamped pumpkin (to hide it) and then stamp the larger pumpkin (shown below).  Notice, the larger pumpkin now appears behind the smaller one.

   
    

7. Then color pumpkins and the rest of the front panel with the inks and blender pen (as you did previously for the leaves).

   
    

8. Adhere the Watercolor paper to the Soft Suede.
9. Adhere the panel to the front of the card (without putting adhesive along the tear, since you will put ribbon underneath it).
10. Wrap a piece of polka dotted ribbon around the card front and adhere to the inside cover as well.
11. Stamp, cut-out, and color a large pumpkin to put on the inside of the card. Then adhere on top of where the ribbon met to hide the seam.

    
     

12. I used a piece of Very Vanilla cardstock for the inside of the card to later write or stamp a holidy greeting.

Other suggestions

• Stamp and color the small pumpkins on scrap. Cut out and then adhere to the card front using Stampin’ Dimensionals to give a raised look to them.
• Also would have looked great with Pumpkin Pie, Really Rust, More Mustard, Chocolate Chip and Old Olive inks.
• Try sponging with Soft Suede around the main card and Watercolor paper edges.

This Owl Treat Bag is sure to please the old and the young alike.  The bag topper is made using the Big Shot Top Note Die in Chocolate Chip cardstock and the following punches:  Round Tab in Creamy Caramel, 5 Petal Punch in Pumpkin Pie, 3/4" circle in Barely Banana, 1/2" circle in Whisper White, and 1/4" circle in Basic Black.  Here is a picture of the different punches:

Please email me if you have any questions.  Of course, my favorite part is the Hershey’s kisses in the small flat cello bag!